Honeywell HC30W45R3 - Figure 62 IEEE 802.1 X Configurations - EAP-PEAP; Figure 63 IEEE 802.1 X Configurations - EAP-TLS

53
Honeywell 30 Series IP Cameras User Guide
Figure 62 IEEE 802.1X Configurations – EAP-PEAP
Figure 63 IEEE 802.1X Configurations – EAP-TLS
Select EAP-PEAP or EAP-TLS as the EAP method. Enter your ID and password issued
by the CA, and then upload related certificate(s).
3. When all settings are complete, move the camera to the protected LAN by connecting
it to an 802.1x enabled switch. The devices will then start the authentication
automatically.