8.4.3 Privacy Zones, Continued
3. To change the type, click on the down arrow beside the Type field and click on
Preset or Privacy Zone. Note: the preset must be programmed prior to defining
it as a privacy zone.
4. Click on Save to save any changes you have made. Note: If you click on another
camera prior to saving changes, the system will prompt you to save your changes.
Yes – saves the changes you made in the current window and opens the window for
the selected camera.
No – discards any changes you made in the current window and opens the window
for the selected camera.
Cancel – aborts the action of selecting a different camera and returns the user to the
Preset Titles window for the previously selected camera.
5. Click on Send to transmit the preset titles for the selected camera to the MaxCom
Gold. Note: this step can be done when all programming is completed using the
Send Receive Centre utility.
6. Select another camera or close the privacy zone menu by clicking on the X in the
upper right corner.
Rev. 1 85 900.0560
18-July-2005
To Next Page
Loading...
Need help?
General
