CHAPTER
1
MPA2C3 Installation Guide 11
INTRODUCTION
Introduction
This document describes how to install the MPA2C3 access control unit, how to
wire the access control panel to doors, readers, downstream devices, how to con-
figure the system for different connection loops and so forth.
Note: All figures shown in this manual are for illustration purpose only. Actual products may
vary due to product enhancement.
Packing List
The MPA2C3 access control unit includes compact plastic enclosures and stan-
dard metal enclosures. The compact plastic enclosure supports the access control
panel (MPA2C3-4), and the standard metal enclosure supports the access control
panel MPA2C3) or the 4-door licensed access control panel MPA2C3). There are
multiple SKU configurations for the unit. For more information, refer to the tables
below.
To Next Page
Loading...
