16 MPA2C3 Installation Guide
Access Control Unit Overview
An MPA2C3 access control unit is a full-featured 2-door web-based access control
system. The panel has all needed inputs/outputs and readers/door connections to
be used as a 4-door panel (MPA2C3-4). The 4-door panel is enabled by a license.
The MPA2C3 panel includes a built-in web service by built-in Ethernet and USB
support, and PoE+ (Power over Ethernet) capability. You can manage the access
control system by using the built-in web services, MAXPRO® Cloud or WIN-PAK®
XE/SE/PE/CS. For supported configurations, see Chapter 5 to view illustrations of
the supported MPA2C3 system configurations.
Two types of enclosures, compact plastic enclosures and metal standard enclo-
sures, are designed for the access control unit. A maximum of 2 doors are sup-
ported by the compact plastic enclosure. A maximum of 2 doors or up to 4 doors
are supported by the standard metal enclosure. For the 3-door or 4-door system, a
license is required.
Note: The MPA2C3 built-in web services are intended for monitoring and programming use
only.
Note: MAXPRO® Cloud and WIN-PAK® XE/SE/PE/CS software is intended for monitoring
and programming use only and have not been evaluated by UL.
Note: To use MPA2C3 as a 4-door access control system, a license needs to be activated.
Once the license file is applied on the panel, the user can use the 4-door controller
(MPA2C3-4). Please contact Honeywell customer support in your region for 4-door
support.
To Next Page
Loading...
Need help?
General
