MPA2C3 Installation Guide 63
5. Connect another OSDP reader with address 0 and repeat steps 2 to 4.
Note: It is not required to disconnect previously addressed reader while assigning address
to a factory reader.
Correcting/Editing Reader Address
Address correction can be done by correcting address of individual reader or by
resetting addresses of all the connected readers.
a. Identify readers with wrong address / wrong function
b. Disconnect all the identified wrong readers but keep one wrong reader
connected.
c. Edit its address assignment and let it come online
Step 1. Click Edit icon of the reader to be edited
Step 2. Click “Continue”
To Next Page
Loading...
