64 MPA2C3 Installation Guide
Step 3. Select new function / address
Step 4. Click Save
Confirmation of Panel
Step 5. System displays new reader function as Online. Previous function is now
Offline
4. Disconnect the edited reader used in last step
5. Connect rest of the readers (with wrong addresses) one at a time and follow
steps 3 and 4
e.g. Readers R1 and R2 installed physically at a door 1 IN and door 1 OUT are
wrongly assigned as Door 1 OUT and Door 1 IN respectively.
1. Disconnect Reader R2
2. Edit Reader R1 and assign address Door 1, Reader IN
3. Disconnect Reader R1 and connect Reader R2
To Next Page
Loading...
