Honeywell MPA2C3 - Osdp Addressing Via Panel

MPA2C3 Installation Guide 59
OSDP ADDRESSING VIA PANEL
OSDP reader’s functions (IN or OUT reader for Door 1-4) are determined by the
connected OSDP bus and the configured address in the reader. In the below tables
the address and respective functions are described.
4 Reader 1 IN READER1 OSDP1 1 - ON ON ON ON
Reader 1 OUT 2 120 OHM
Reader 2 IN READER2 OSDP2 1 -
Reader 2 OUT 2 120 OHM
4 Reader 1 IN READER1 OSDP1 1 120 OHM OFF OFF OFF OFF
Reader 3 IN READER3 3 120 OHM
Reader 2 IN READER2 OSDP2 1 120 OHM
Reader 4 IN READER4 3 120 OHM
5 Reader 1 IN READER1 OSDP1 1 - OFF OFF ON ON
Reader 1 OUT 2 120 OHM
Reader 3 IN READER3 3 120 OHM
Reader 2 IN READER2 OSDP2 1 -
Reader 2 OUT 2 120 OHM
5 Reader 1 IN READER1 OSDP1 1 - OFF OFF OFF OFF
Reader 1 OUT 2 120 OHM
Reader 3 IN READER3 3 120 OHM
Reader 2 IN READER2 OSDP2 1 120 OHM
Reader 4 IN READER4 2 120 OHM
8 Reader 1 IN READER1 OSDP1 1 - OFF OFF OFF OFF
MPA2C3 (2 door) OSDP Reader
Reader Connection
mode
RJ45 Connector
Reader Address Reader Function
READER
OSDP READER 1 IN 1 Door1 IN reader
Wieg.A / OSDP 1
READER 1 OUT 2 Door1 OUT reader
Wieg.B / OSDP 1
READER 2 IN 1 Door2 IN reader
Wieg.A / OSDP 2
READER 2 OUT 2 Door2 OUT reader
Wieg.B / OSDP 2
MPA2C3-4 (4 door) OSDP Reader