Honeywell ST 800 - Glossary

Page 98 ST 800 SmartLine Pressure Transmitters User’s Manual Revision 10
A3. Hazardous Locations Certifications
MSG
CODE
AGENCY
TYPE OF PROTECTION
COMM
OPTION
Electrical
Parameters
Ambient
Temperature
A
FM-USA
Explosion proof:
Class I, Division 1, Groups A, B, C, D
Dust Ignition Proof:
Class II, III, Division 1, Groups E, F, G
Class I, Zone 0/1, AEx d IIC Ga/Gb
Class II, Zone 21, AEx tb IIIC T 95
o
C Db
DE/HART
/FF
Note 1
T5: -50 ºC to 85ºC
T6: -50 ºC to 65ºC
Intrinsically Safe:
Class I, II, III, Division 1, Groups A, B, C,
D, E, F, G
Class I Zone 0 AEx ia IIC Ga
FISCO Field Device (Only for FF Option)
Ex ia IIC Ga
DE/HART
/FF
Note 2
T4: -50
o
C to 70
o
C
Non-Incendive
Class I, Division 2, Groups A, B, C, D
Class I Zone 2 AEx nA IIC Gc
DE/HART
/FF
Note 1
T4: -50
o
C to 85
o
C
Enclosure: Type 4X/ IP66/ IP67
ALL
ALL
ALL
Standards: FM 3600:2011; ANSI/ ISA 60079-0: 2009
FM 3615:2006; ANSI/ ISA 60079-1 : 2009
FM 3616 : 2011 ; ANSI/ ISA 60079-31 : 2009
FM 3610:2010; ANSI/ ISA 60079-11 : 2011
FM 3810 : 2005 ; ANSI/ ISA 60079-26 : 2008
FM 3611:2004; ANSI/ ISA 60079-15 : 2009 ; FM 3810 : 2005 ;
NEMA 250 : 2003 ; ANSI/ IEC 60529 : 2004
B
CSA-
Canada
Explosion proof:
Class I, Division 1, Groups A, B, C, D
Dust Ignition Proof:
Class II, III, Division 1, Groups E, F, G
Zone 0/1, Ex d IIC Ga/Gb
Ex tb IIIC T 95
o
C Db
DE/HART
/FF
Note 1
T5: -50 ºC to 85ºC
T6: -50 ºC to 65ºC
Intrinsically Safe:
Class I, II, III, Division 1, Groups A, B, C,
D, E, F, G;
Ex ia IIC Ga
FISCO Field Device (Only for FF Option)
Ex ia IIC Ga
DE/HART
/FF
Note 2
T4: -50
o
C to 70
o
C
Non-Incendive
Class I, Division 2, Groups A, B, C, D
Ex nA IIC Gc
DE/HART
/FF
Note 1
T4: -50
o
C to 85
o
C
Enclosure: Type 4X/ IP66/ IP67
ALL
ALL
ALL
Standards: ANSI/ ISA 60079-0: 2009 ; CAN/ CSA-C22.2 No. 0-M91:2006; CAN/ CSAE60079-0:2002;
ANSI/ UL 913 : 2010 ; ANSI/ ISA 60079-11 : 2009; CAN/ CSA-C22.2 No.157-92: 1992; CAN/CSA-E
60079-11: 2002; ANSI/ ISA 60079-26 : 2008; ANSI/ ISA 12.12.01 : 2007 ; ANSI/ ISA 60079-15 : 2009 ;
C22.2 No. 213-M1987; CAN/CSA-E60079-15: 2002; ANSI/ UL 50 : 2007 ; ANSI/ IEC 60529 : 2004