Honeywell ST 800 - Page 110

Page 100 ST 800 SmartLine Pressure Transmitters User’s Manual Revision 10
F
INMETRO
Intrinsically Safe:
Ex ia IIC Ga
FISCO Field Device (Only for FF Option)
Ex ia IIC Ga
DE/HART
/FF
Note 2
T4: -50
o
C to 70
o
C
Non Sparking:
Ex nA IIC Gc
DE/HART
/FF
Note 1
T4: -50
o
C to 85
o
C
Flameproof:
Ex d IIC Ga/Gb
Ex tb IIIC T 95
o
C Db
DE/HART
/FF
Note 1
T4: -50
o
C to 85
o
C
Enclosure: IP66/ IP67
ALL
ALL
ALL
G
NEPSI
(CHINA)
Intrinsically Safe:
Ex ia IIC Ga
FISCO Field Device (Only for FF Option)
Ex ia IIC Gc
DE/HART
/FF
Note 2
T4: -50
o
C to 70
o
C
Non Sparking:
Ex nA IIC Gc
DE/HART
/FF
Note 1
T4: -50
o
C to 85
o
C
Flameproof:
1 Ex d IIC Ga/Gb
Ex tb IIIC Db T 95
o
C Db
All
Note 1
T4: -50 ºC to 85ºC
Enclosure: IP66/ IP67
ALL
ALL
ALL
-------
GOST
Intrinsically Safe:
0 Ex ia IIC Ga
FISCO Field Device (Only for FF Option)
Ex ia IIC
DE/ HART/
FF
Note 2
T4: -50 ºC to 70ºC
Enclosure : IP 66/67
All
All
Notes
1. Operating Parameters:
DE/HART
Foundation Fieldbus
Voltage= 11 to 42 V
Voltages = 9 to 23 V
Current= 4-20 mA Normal (3.8 – 23 mA Faults)
Current = 25 mA
2. Intrinsically Safe Entity Parameters
For details see Control Drawing on page 102.
3. Marking ATEX Directive
General:
The following information is provided as part of the labeling of the transmitter:
• Name and Address of the manufacturer
• Notified Body identification: DEKRA Quality B.V., Arnhem, the Netherlands
• For complete model number, see the Model Selection Guide for the particular model of pressure
transmitter.
• The serial number of the transmitter is located on the Meter Body data-plate. The first two digits of the
serial number identify the year (02) and the second two digits identify the week of the year (23); for
example, 0223xxxxxxxx indicates that the product was manufactured in 2002, in the 23 rd week.