Honeywell Stratos 2700 - Page 232

13 - 14
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 9-2
Transmit CBRSSX1 9-2
Codabar Check Char. *No Check Char. CBRCK20 9-3
Validate, But Don’t Transmit CBRCK21 9-3
Validate, and Transmit CBRCK22 9-3
Codabar Concatenation *Off CBRCCT0 9-3
On CBRCCT1 9-3
Require CBRCCT2 9-3
Codabar Redundancy Range (0 - 10) *0 CBRVOT## 9-4
Codabar Message Length Minimum (1 - 80) *3 CBRMIN## 9-4
Maximum (1 - 80) *80 CBRMAX## 9-4
Code 39 Default All Code 39
Settings
C39DFT 9-5
*Off C39ENA0 9-5
On C39ENA1 9-5
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 9-5
Transmit C39SSX1 9-5
Code 39 Check Char. *No Check Char. C39CK20 9-5
Validate, But Don’t
Trans mit
C39CK21 9-6
Validate,
and Transmit
C39CK22 9-6
Code 39 Message Length Minimum (0 - 80) *3 C39MIN## 9-6
Maximum (0 - 80) *80 C39MAX## 9-6
Code 39 Redundancy Range (0 - 10) *0 C39VOT## 9-6
Code 32 Pharmaceutical (PARAF) *Off C39B320 9-7
On C39B321 9-6
Code 39 Full ASCII *Off C39ASC0 9-7
On C39ASC1 9-7
Code 39 Code Page C39DCP 9-8
Interleaved 2 of 5 Default All Interleaved
2 of 5 Settings
I25DFT 9-8
*Off I25ENA0 9-8
On I25ENA1 9-8
NULL Characters *Off I25NUL0 9-8
On I25NUL1 9-8
Interleaved 2 of 5 Check Digit *No Check Char. I25CK20 9-9
Validate, But Don’t
Trans mit
I25CK21 9-9
Validate, and Transmit I25CK22 9-9
Interleaved 2 of 5 Redundancy Range (0 - 10) *0 I25VOT## 9-9
Interleaved 2 of 5 Message Length Minimum (1 - 80) *6 I25MIN## 9-9
Maximum (1 - 80) *80 I25MAX## 9-9
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page