Honeywell Stratos 2700 - Page 233

13 - 15
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 9-10
*Off N25ENA0 9-10
On N25ENA1 9-10
NEC 2 of 5 Check Digit *No Check Char. N25CK20 9-10
Validate, But Don’t
Trans mit
N25CK21 9-10
Validate, and Transmit N25CK22 9-10
NEC 2 of 5 Redundancy Range (0 - 10) *0 N25VOT## 9-11
NEC 2 of 5 Message Length Minimum (1 - 80) *6 N25MIN## 9-11
Maximum (1 - 80) *80 N25MAX## 9-11
Code 93 Default All Code 93
Settings
C93DFT 9-11
*Off C93ENA0 9-11
On C93ENA1 9-11
Code 93 Redundancy Range (0 - 10) *0 C93VOT## 9-12
Code 93 Message Length Minimum (1 - 80) *3 C93MIN## 9-12
Maximum (1 - 80) *80 C93MAX## 9-12
Code 93 Code Page Code 93 Code Page C93DCP 9-12
Straight 2 of 5 Industrial Default All Straight 2 of 5 Industrial Settings R25DFT 9-13
*Off R25ENA0 9-13
On R25ENA1 9-13
Straight 2 of 5 Industrial Redundancy Range (0 - 10) *0 R25VOT## 9-13
Straight 2 of 5 Industrial Message Length Minimum (1 - 80) *6 R25MIN## 9-13
Maximum (1 - 80) *80 R25MAX## 9-13
Straight 2 of 5 IATA Default All Straight 2 of 5 IATA
Settings
A25DFT 9-14
Straight 2 of 5 IATA *Off A25ENA0 9-14
On A25ENA1 9-14
Straight 2 of 5 IATA Redundancy Range (0 - 10) *0 A25VOT## 9-14
Straight 2 of 5 IATA Message Length Minimum (1 - 80) *6 A25MIN## 9-14
Maximum (1 - 80) *15 A25MAX## 9-14
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 9-15
*Off X25ENA0 9-15
On X25ENA1 9-15
Matrix 2 of 5 Check Digit *No Check Digit X25CK20 9-15
Validate, But Don’t
Trans mit
X25CK21 9-15
Validate, and Transmit X25CK22 9-15
Matrix 2 of 5 Redundancy Range (0 - 10) *0 X25VOT## 9-16
Matrix 2 of 5 Message Length Minimum (1 - 80) *6 X25MIN## 9-16
Maximum (1 - 80) *80 X25MAX## 9-16
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page