Honeywell Stratos 2700 - Page 234

13 - 16
Code 11 Default All Code 11
Settings
C11DFT 9-17
*Off C11ENA0 9-17
On C11ENA1 9-17
Code 11 Check Digits Required 1 Check Digit C11CK20 9-17
*2 Check Digits C11CK21 9-17
Check Digit Validation Validate and Transmit One Check Digit C11CK23 9-17
Validate and Transmit Two Check Digits C11CK24 9-17
Code 11 Redundancy Range (0 - 10) *0 C11VOT## 9-18
Code 11 Message Length Minimum (1 - 80) *3 C11MIN## 9-18
Maximum (1 - 80) *80 C11MAX## 9-18
Code 128 Default All Code 128
Settings
128DFT 9-19
Off 128ENA0 9-19
*On 128ENA1 9-19
128 Group Separator Output *Off 128GSE0 9-19
On 128GSE1 9-19
Code 128 Redundancy Range (0 - 10) *0 128VOT## 9-19
Code 128 Message Length Minimum (0 - 80) *3 128MIN## 9-20
Maximum (0 - 80) *80 128MAX## 9-20
Code 128 Code Page Code 128 Code Page (*2) 128DCP## 9-20
ISBT 128 *Off ISBENA0 9-20
On ISBENA1 9-20
Concatenation Timeout DLYCCT 9-21
ISBT128 Predefined Concatenation
Sequences
* Donation ID Number (001)
and ABO/RhD Blood Groups (002)
ISBPCS0 9-21
Donation ID Number (001) and
Donor ID Number (019)
ISBPCS1 9-21
Donation ID Number (001) and Confidential
Unit Exclusion Status
ISBPCS2 9-21
Product Code (003) and Expiration Date
(Form 1)
ISBPCS3 9-21
Product Code (003) and Expiration Date
(Form 2)
ISBPCS4 9-22
Product Code (003) and Expiration Date
(Form 3)
ISBPCS5 9-22
Product Code (003) and Expiration Date
(Form 4)
ISBPCS6 9-21
ISBT 128 Predefined Concatenation
Sequences On/Off
*Off ISBPCE0 9-22
Allow Predefined Sequence ISBPCE1 9-22
Require Predefined Sequence ISBPCE2 9-22
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page