Certifications
MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 127 Technical Handbook
Chapter 12.
12.1 EU Declaration of Conformity
A full EC declaration of conformity is available on either original hardcopy or electronic file (Honeywell Analytics
website). This document lists the European Standards with which Touchpoint Plus complies.
12.2 National and International Certificates of Compliance
The Touchpoint Plus Process Control Equipment holds the following National and International Certificates and
Certification Codes:
Hazardous
Locations
(Non-Incendive)
Class 1, Division 2, Groups A,B,C,D, Temp. Code T4
ISA 12.12.01-2013
CSA C22.2 No. 213-M1987
Ordinary Locations /
Electrical Safety
UL/IEC/EN 61010-1, UL 508
CSA C22.2 No.61010-1/No.142
UL File E466771
UL File E470577
EMC Directive (EN 50270:2015)
UN 38.3 (IEC 62133), UL 2054, UL 60950-1
CSA C22.2 No.60950-1-07
ISA 12.13.01 and CSA C22.2 No.152
UL File E466771 and
E480011
EN 60079-29-1, EN 50104, EN 45544-1/2/3 and EN 50271
BVS 17 ATEX G 001 X,
PFG 17 G 002 X
Designed to meet IEC/EN61508:2010 and SIL2 certification
Copies of the certificates are available on request.
Note 1: OEMs are responsible for ensuring that their systems are certified in accordance with these tables and
any 3
rd
-party requirements.
WARNING
Only the combustible gas detection portion of this instrument has been assessed for performance
in accordance with the ATEX Directive.
AVERTISSEMENT
Seulement la
WARNING
CSA performance is only valid when TPPL is connected to Honeywell Model MPD or 705 Catalytic
Gas Detectors, or suitably approved 4 20 mA Gas Detectors.
AVERTISSEMENT
z catalytiques Honeywell modèle MPD ou 705, ou à des détecteurs de gaz 4
To Next Page
Loading...
