Commissioning
MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 73 Technical Handbook
12) Review the settings, scrolling down to see them all:
13) If happy with the settings, touch [Apply]. Wait for the changes to be made.
14) Review again and select [Update].
15) Repeat all to Commission or edit further relay channels.
6.14.7 Editing mA Output Channel Settings
Prior to starting you should have completed configuring or editing all of the required input channels.
1) Log in as Service.
2) Touch Menu>Configuration>Channel Settings.
3) Touch the mA Output Module
4) :
To Next Page
Loading...
