MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 74 Technical Handbook
5) Touch the [Channel] you want to change and then touch [Select].
6) Touch the buttons and boxes to make changes as required:
7) Touch [Next].
Set special state output levels:
8) Touch [Next].
Select input channel to map the mA output
9) Touch [Finish].
10) If happy with the settings, touch [Apply]. Wait for the changes to be made.
11) Repeat all to Commission or edit further mA output channels.
To Next Page
Loading...
