To Next Page

To Previous Page

Commissioning

MAN0984_Iss 4_01/19 Touchpoint Plus

Pt. No. 3011M5001 70 Technical Handbook

6) Touch the required settings, change details and touch [Select]:

Note: The Target Gas Type is automatically entered by your choice of Sensor Type.

Note: The Sensor Type gases will vary with different types of Detectors -

with EN 60079-20-1 LEL levels.

Note: Sensors must be recalibrated when selecting a new target gas.

Note: Refer to sensor user manual for selection of gas group

Note: Refer to Ch.6.14.4 of mA input channel setting for the additional mV input setting. Note that STEL and TWA are

not available for mV input channels.

Refer to Ch.16 Compatible Sensors for a list of

available detectors.

You can also use the TPPL Sensor Catalog to select

your gas is not listed.

Refer to Ch. 9.4 How to Update the Sensor Catalogue

for further information.

Honeywell Touchpoint Plus Technical Handbook

Other manuals for Honeywell Touchpoint Plus