MAN0984_Iss 4_01/19 Touchpoint Plus
Pt. No. 3011M5001 97 Technical Handbook
Shows detailed information about the
channel including Custom ID, sensor and
gas name, gas reading, configured alarms
and alarm levels.
Option to calibrate the channel.
Change the input channel settings.
Reset peak reading of the channel.
Shows the trend graph for the channel.
See Normal Operation, View Trend Graph
for more information.
Inhibits the channel. On an inhibited
channel, this option is Clear Inhibit. See
Normal Operation, Inhibit for more
information.
Shows the physical position of the I/O
Module and channel (see pictures above).
Scroll Left, Right, Up, Down.
To Next Page
Loading...
Need help?
General
