HP Compaq nc6000 - Notebook PC Hardware Guide

2–4 Hardware Guide
Pointing Devices and Keyboard
Using an External Mouse
An external USB mouse can be connected to the notebook using
one of the connectors on the back panel. An external PS/2 or USB
mouse can be connected to the system using the connectors on an
optional Advanced Port Replicator.
Setting Pointing Device Preferences
Mouse Properties in Windows enables you to customize settings
for pointing devices, including:
■ Enabling or disabling a pointing device (enabled by default).
■ TouchPad tapping, which enables you to tap the TouchPad
once to select an object or twice to double-click an object
(disabled by default).
■ Edge motion, which enables you to continue to scroll even
though your finger has reached the edge of the TouchPad
(disabled by default).
■ Palm Check, which helps prevent moving the pointer
unintentionally if your palms contact the TouchPad as
you type (disabled by default).
Other features, such as mouse speed preferences and mouse trails,
are also found in the Mouse Properties window.
To access Mouse Properties:
■ In Windows 2000, select Start > Settings > Control Panel >
Mouse icon.
■ In Windows XP, select Start > Control Panel > Printers and
Other Hardware > Mouse icon.
333644-001.book Page 4 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone