EasyManuals Logo

HP Compaq nc6000 - Notebook PC Hardware Guide

HP Compaq nc6000 - Notebook PC
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
4–14 Hardware Guide
Drives
Removing an Optical Disc (With Power)
If power is available:
1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release the
media tray, then pull the tray 2 out until it is fully extended.
3. Remove the disc 3 from the tray by gently pushing down on
the spindle while lifting the outer edges of the disc. Handle
the disc by the edges, not the flat surfaces. If the media tray is
not fully extended, tilt the disc as you remove it.
4. Close the media tray and place the disc in a protective case.
333644-001.book Page 14 Thursday, July 10, 2003 2:56 PM

Table of Contents

Other manuals for HP Compaq nc6000 - Notebook PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq nc6000 - Notebook PC and is the answer not in the manual?

HP Compaq nc6000 - Notebook PC Specifications

General IconGeneral
ProcessorIntel Pentium M
ChipsetIntel 855PM
Storage30 GB to 60 GB HDD
Hard Drive InterfaceATA-100
Battery6-cell Lithium-Ion
Operating SystemWindows XP Professional
RAM256 MB, upgradable to 2 GB
GraphicsATI Mobility Radeon 9600
Display14.1-inch
Display Resolution1024 x 768 or 1400 x 1050
Optical DriveDVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking10/100/1000 Ethernet
Ports2 x USB 2.0, VGA, parallel, serial, headphone, microphone

Related product manuals