HP Compaq nc6000 - Notebook PC Hardware Guide

Hardware Upgrades
Hardware Guide 8–3
Removing a PC Card
Ä
CAUTION: To prevent loss of work or an unresponsive system, stop the
PC Card before removing it.
1. Stop the PC Card.
❏ In Windows 2000—Select the Unplug or Eject icon on
the taskbar, then stop the card you plan to remove. When
the card can be safely removed, a message is displayed.
❏ In Windows XP—Select the Safely Remove Hardware
icon on the taskbar, then select the PC Card. (To display
the Safely Remove Hardware icon, select Show Hidden
Icons on the taskbar.)
2. Press the PC Card eject button 1 adjacent to the PC Card that
is to be removed. This action extends the button into position
for releasing the PC Card.
3. To release the PC Card, press the extended PC Card eject
button.
4. Gently pull out the card 2.
✎
An inserted PC Card uses power even when not in use. To
conserve power, stop or remove a PC Card when you are not
using it.
333644-001.book Page 3 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone