HP Compaq nc6000 - Notebook PC Hardware Guide

2–6 Hardware Guide
Pointing Devices and Keyboard
Hotkey and Shortcut Key Quick Reference
Initiating Standby (fn+f3)
■ When the notebook is on, press the fn+f3 hotkey to initiate
Standby. When Standby is initiated, your work is saved in
random access memory (RAM), the screen is cleared, and
power is conserved. While the notebook is in Standby, the
Power/Standby light blinks.
■ To exit Standby, briefly press the power button.
The
fn+f3 hotkey is set at the factory to initiate Standby.
The function of the
fn+f3 hotkey, called the “sleep button” in
Windows, can be changed. For example, the
fn+f3 hotkey can
be set to initiate Hibernation instead of Standby. For more
information about Standby, Hibernation, and changing the
function of the
fn+f3 hotkey, refer on the Documentation Library
CD to the Software Guide, “Power” chapter.
Function
Key combination to
activate function
Key combination to
deactivate function
Initiate Standby fn+f3 Power button
Switch between
notebook display and
external display
fn+f4 fn+f4
View battery information fn+f8 fn+f8
Decrease screen
brightness
fn+f9 N/A
Increase screen
brightness
fn+f10 N/A
Display system
information
fn+esc fn+esc
333644-001.book Page 6 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone