HP Compaq nc6000 - Notebook PC Hardware Guide

3–8 Hardware Guide
Battery Packs
Monitoring the Charge in a Battery
Pack
This section explains several ways you can determine the amount
of charge in your battery pack.
Obtaining Accurate Charge Information
To increase the accuracy of all battery charge displays:
■ Allow a battery pack to discharge to about 10 percent of a full
charge through normal use before charging it.
■ When you charge a battery pack, charge it fully.
■ If a battery pack has not been used for 1 month or more,
calibrate the battery pack instead of simply charging it. For
calibration instructions, refer to “Calibrating a Battery Pack”
later in this chapter.
Displaying Charge Information on the
Screen
This section explains how to access and interpret battery charge
displays.
Accessing Charge Displays
To access information about the status of any battery pack in the
notebook:
■ Select the Power Meter icon on the taskbar.
■ Access the Power Meter tab. To access the Power Meter tab:
❏ In Windows 2000, select Start > Settings > Control
Panel > Power Options icon > Power Meter tab.
❏ In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options icon >
Power Meter tab.
333644-001.book Page 8 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone