HP Compaq nc6000 - Notebook PC Hardware Guide

Battery Packs
Hardware Guide 3–7
Charging a New Battery Pack
Fully charge the battery pack while the notebook is connected to
external power through the AC adapter.
A new battery pack that has been partially but not fully charged
can run the notebook, but the battery charge indicators may
be inaccurate.
Charging an In-Use Battery Pack
To prolong battery life and increase the accuracy of battery
charge indicators:
■ Allow a battery pack to discharge to 10 percent of a full
charge through normal use before charging it.
■ When you charge a battery pack, charge it fully.
Charging a Primary and MultiBay Battery
Pack
If a primary battery pack is in the battery bay and a MultiBay
battery pack is in the MultiBay, the primary battery pack is the
first to charge and the MultiBay battery pack is the first to
discharge.
333644-001.book Page 7 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone