2–12 Hardware Guide
Pointing Devices and Keyboard
Using an External Keypad
Most keys on most external keypads function differently,
according to whether num lock mode is on or off. For example:
■ When num lock is on, most keypad keys type numbers.
■ When num lock is off, most keypad keys function like the
arrow, page up, or page down keys.
When num lock on an external keypad is turned on, the num lock
light on the notebook turns on. When num lock on an external
keypad is turned off, the num lock light on the notebook turns off.
If the external keypad is connected, the embedded numeric
keypad cannot be turned on.
Enabling or Disabling Num Lock Mode As You Work
To turn num lock on or off on an external keypad as you work,
press the
num lk key on the external keypad, not on the notebook.
Enabling or Disabling Num Lock Mode at Startup
To configure the notebook to start up with a connected external
keypad in num lock mode, you must set this preference in
Computer Setup. For more information about using Computer
Setup, refer on the Documentation Library CD to the Software
Guide, “Computer Setup” chapter.
To set the notebook to start up with the external keypad enabled:
1. Turn on or restart the notebook.
2. Press
f10 while the F10 = ROM Based Setup message is
displayed in the lower left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
3. Select Advanced > Device Options, then press enter.
333644-001.book Page 12 Thursday, July 10, 2003 2:56 PM
To Next Page
Loading...
Need help?
General
