HP Compaq nc6000 - Notebook PC Hardware Guide

Pointing Devices and Keyboard
Hardware Guide 2–11
Enabling and Disabling the Embedded Numeric
Keypad
Press fn+num lk to enable the embedded numeric keypad. The num
lock light turns on. Press
fn+num lk again to return the keys to their
standard keyboard functions.
✎
The embedded numeric keypad does not work while an external
keyboard or keypad is connected to the notebook or to an optional
port replicator.
Switching Key Functions on the Embedded Numeric
Keypad
You can temporarily switch the functions of keys on the
embedded numeric keypad between their standard keyboard
functions and their keypad functions by using the
fn key or the
fn+shift key combination.
■ To change the function of a keypad key to keypad functions
while the keypad is off, press and hold the
fn key while
pressing the keypad key.
■ To use the keypad keys temporarily as standard keys while
the keypad is on:
❏ Press and hold the fn key to type in lowercase.
❏ Press and hold fn+shift to type in uppercase.
333644-001.book Page 11 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone