Battery Packs
Hardware Guide 3–11
Managing Low-Battery Conditions
Some low-battery condition alerts and system responses can be
changed in the Power Options window of the operating system.
The information in this section describes the alerts and system
responses set at the factory. Preferences set in the Power Options
window do not affect lights.
Identifying Low-Battery Conditions
This section explains how to identify low and critical low-battery
conditions.
Low-Battery Condition
When a battery pack that is the sole power source for the
notebook reaches a low-battery condition, the battery light blinks.
Critical Low-Battery Condition
If a low-battery condition is not resolved, the notebook enters
a critical low-battery condition.
In a critical low-battery condition:
■ If Hibernation is enabled and the notebook is on or in
Standby, the notebook initiates Hibernation.
■ If Hibernation is disabled and the notebook is on or in
Standby, the notebook remains briefly in Standby, then
shuts down and loses your unsaved work.
To verify that Hibernation is enabled, be sure that the Enable
Hibernate Support check box on the Hibernate tab is selected.
To access the tab:
■ In Windows 2000, select Start > Settings > Control Panel.
Double-click Power Options.
■ In Windows XP, select Start > Control Panel > Performance
and Maintenance > Power Options icon.
333644-001.book Page 11 Thursday, July 10, 2003 2:56 PM
To Next Page
Loading...
Need help?
General
