HP Compaq nc6000 - Notebook PC Hardware Guide

Notebook Features
Hardware Guide 1–15
Bottom Components
Bottom component descriptions
Item Component Description
1
Docking connector Connects the notebook to an optional
Port Replicator or an Advanced Port
Replicator.
2
Keyboard access screws (2) Allow you to remove the keyboard in
order to access system memory.
3
Intake vent Enables airflow to cool internal
components.
Ä
To prevent overheating, do
not obstruct vents. Using the
notebook on a soft surface,
such as a pillow, blanket, rug,
or thick clothing may block
airflow.
4
Battery release latch Releases the primary battery pack from
the battery bay.
5
Battery bay Holds the primary battery pack.
6
Hard drive security screw Secures the hard drive.
333644-001.book Page 15 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone