5. Fan assembly #21. 8/80 SAN Switch
6. Fan assembly #12. Nonport side
7. Power supply #13. Power supply #2
4. Fan assembly #3
Figure 5 Nonport side view—8/80 SAN Switch
.
Activating additional 8/80 SAN Switch ports
By default, the 8/80 SAN Switch model integrates 48 licensed ports (ports 0 through 47). To enable
additional ports, you must purchase and install the HP StorageWorks 8/80 SAN Switch 8-Gb 16-port
Upgrade LTU (part number T5520A):
• To enable ports 48 through 63, you must purchase and install one upgrade license.
• To enable ports 64 through 80, you must purchase and install a second upgrade license.
See Installing and activating Port Upgrade licenses, page 25.
Encryption SAN Switch features
The Encryption SAN Switch has the following features:
• 32 front-end 1, 2, 4, or 8 Gb/s autosensing F_Port, FL_Port, E_Port, EX_Port, or M_Ports to connect
host servers, SAN disks, SAN tapes, edge switches, or core switches
• Encryption and decryption engines to provide in-line crypto services with up to 96 Gb/s throughput
for disk I/O and up to 48 Gb/s throughput for tape I/O (mix of ciphertext and cleartext traffic)
• Integrated with HP SKM system
• Full 1:1 subscription on all 32 ports at 8 Gb/s
• HA cluster, DEK cluster, and EG to enable transparent failover, host MPIO failover, and centralized
management of multiple encryption switches
• Support for automatic expiry or CLI manual based re-keying
HP StorageWorks 8-Gb SAN Switches18
To Next Page
Loading...
