Boot
Boot performs the following tasks after POST is complete:
• Performs universal port configuration
• Initializes links
• Analyzes the fabric
If any ports are connected to other switches, the switch participates in a fabric configuration.
• Obtains a domain ID and assigns port addresses
• Constructs unicast routing tables
• Enables normal port operation
Supported HBAs and CNAs
NOTE:
CNAs apply to the FCoE Converged Network Switch only.
For a list of HBAs that have been tested and are known to work with the SAN switches, see the latest
version of the HP StorageWorks SAN Design Reference Guide, at http://www.hp.com/go/
sandesignguide.
Technical specifications94
To Next Page
Loading...
