HP 1606 - Supported SFP Transceiver Options; Trunking Groups Example

3. Trunk group 3: Ports 16–231. Trunk group 1: Ports 0–7
2. Trunk group 2: Ports 8–15
Figure 12 Trunking groups example
.
For more information about trunking, see the Fabric OS Administrator's Guide for the firmware version
you are running.
Supported SFP transceiver options
Table 2 lists the only SFPs supported in your HP StorageWorks 8-Gb SAN Switches.
Table 2 Supported SFP transceiver options
Part numberOptionPort typeSwitch product
AJ716A8Gb/s short wave SFP+
Fibre Channel
2408 FCoE switch
AJ717A8Gb/s long wave SFP+
AJ715A4Gb/s short wave SFP
AK870A4Gb/s long wave SFP
AN211A
4Gb/s extended long
wave SFP
AW538A
8Gb/s extended long
wave SFP
AP823A10GbE short range SFP+
10GbE CEE ports
AP824A10GbE long range SFP+
AP818A
1m active copper SFP+
cable
AP819A
3m active copper SFP+
cable
AP820A
5m active copper SFP+
cable
AJ716A8Gb/s short-wave SFP+
Fibre Channel1606 Extension switch
AJ717A8Gb/s long-wave SFP+
8-Gb SAN Switch Hardware Reference Guide 27