HP 1606 - 8;80 SAN Switch and Encryption SAN Switch FRU Units; And Encryption SAN Switch Fan Assemblies on the Nonport Side

4. Verify that the fan status LED is lit steady green to indicate normal operation.
5. Optionally, display the fan status using the fanshow command from the CLI.
8/80 SAN Switch and Encryption SAN Switch FRU units
Replace the following FRUs as required:
• Fan assembly
• Power supply
The 8/80 SAN Switch and Encryption SAN Switch integrate three fan assemblies (see Figure 36).
Fabric OS identifies the fans from left to right as Fan assembly #3, Fan assembly #2, and Fan assembly
#1.
4. Fan assembly #21. 8/80 SAN Switch
5. Fan assembly #32. Nonport side
3. Fan assembly #1
Figure 36 8/80 and Encryption SAN Switch fan assemblies on the nonport side
.
Managing the 8-Gb SAN Switches78