To Next Page

To Previous Page

3-20

Multiple Instance Spanning-Tree Operation

Configuring MSTP

The no form of the command overwrites the currently

configured name with the default name.

Note: This option is available only when the switch is

configured for MSTP operation. Also, there is no defined

limit on the number of regions you can configure.

Syntax: spanning-tree config-revision < revision-number >

This command configures the revision number you designate

for the MST region in which you want the switch to reside.

This setting must be the same for all switches residing in the

same region. Use this setting to differentiate between region

configurations in situations such as the following:

• Changing configuration settings within a region where you

want to track the configuration versions you use

• Creating a new region from a subset of switches in a current

region and want to maintain the same region name.

• Using the pending option to maintain two different

configuration options for the same physical region.

Note that this setting must be the same for all MSTP switches

in the same MST region. (Range: 0 - 65535; Default: 0)

Note: This option is available only when the switch is

configured for MSTP operation.

Other manuals for HP 3500 Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500 Series and is the answer not in the manual?

General