HP 3500 Series Advanced Traffic Management Guide

7-1
QinQ (Provider Bridging)
Overview
7
QinQ (Provider Bridging)
Overview
This chapter describes how to enable QinQ operations on the switch and how
to configure provider bridge S-VLANs and port assignments.
For information on how to configure and use static, port-based and proto-
col-based VLANs, refer to chapter 1, “Static Virtual LANs (VLANs)”.
For information on how to configure dynamic VLANs on the switch, refer to
chapter 2, “GVRP”.
License
Requirements
In the 3500yl, 5400zl, 6600 and 8200zl switches, QinQ is included with the
Premium License. In the 6200yl switches, this feature is included with the base
feature set.

HP 3500 Series Specifications

General

Model	HP 3500 Series
Layer	Layer 3
MAC Address Table Size	16, 000 entries
Type	Managed
Uplink	SFP
PoE	Optional
Management	Web, CLI, SNMP
Routing Protocol	Static, RIP
Power Supply	Internal
Form Factor	1U rack-mountable
Jumbo Frame Support	Yes
Operating Temperature	32°F to 113°F (0°C to 45°C)
Ports	24 or 48 10/100/1000 ports