To Next Page

To Previous Page

3-52

Multiple Instance Spanning-Tree Operation

Displaying MSTP Statistics and Configuration

Displaying Global MSTP Status

The following commands display the MSTP statistics for the connections

between MST regions in a network.

Syntax: show spanning-tree

This command displays the switch’s global and regional

spanning-tree status, plus the per-port spanning-tree

operation at the regional level. Note that values for the

following parameters appear only for ports connected to active

devices: Designated Bridge, Hello Time, PtP, and Edge.

Syntax: show spanning-tree < port-list >

This command displays the spanning-tree status for the

designated port(s). You can list data for a series of ports and

port trunks by specifying the first and last port or trunk of any

consecutive series of ports and trunks. For example, to display

data for port A20-A24 and trk1, you would use this command:

show spanning-tree a20-a42,trk1

Other manuals for HP 3500 Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500 Series and is the answer not in the manual?

General