HP 3500 Series Advanced Traffic Management Guide

5-91
Quality of Service: Managing Bandwidth More Effectively
Differentiated Services Codepoint (DSCP) Mapping
Table 5-11. The Default DSCP Policy Table
Default Priority Settings for Selected Codepoints
In a few cases, such as 001010 and 001100, a default DSCP policy (implied by
the DSCP standards for Assured-Forwarding and Expedited-Forwarding) is
used. You can change the priorities for the default policies by using the qos
dscp-map < codepoint > priority < 0 - 7 > command.
The currently configured DSCP policies (codepoint and associated 802.1p
priority) are not enabled until you configure a global or classifier-based QoS
policy to mark matching packets or configure a global IP-Diffserv classifier.
DSCP Policy 802.1p Priority DSCP Policy 802.1p Priority DSCP Policy 802.1p Priority
000000
000001
000010
000011
000100
000101
000110
000111
001000
001001
001010
001011
001100
001101
001110
001111
010000
010001
010010
010011
010100
010101
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
1*
No-override
1*
No-override
2*
No-override
No-override
No-override
0 *
No-override
0 *
No-override
010110
010111
011000
011001
011010
011011
011100
011101
011110
011111
100000
100001
100010
100011
100100
100101
100110
100111
101000
101001
101010
3*
No-override
No-override
No-override
4*
No-override
4*
No-override
5*
No-override
No-override
No-override
6*
No-override
6*
No-override
7*
No-override
No-override
No-override
No-override
101011
101100
101101
101110
101111
110000
110001
110010
110011
110100
110101
110110
110111
111000
111001
111010
111011
111100
111101
111110
111111
No-override
No-override
No-override
7**
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
No-override
*Assured Forwarding codepoints; configured by default on the switches covered in this guide.
**Expedited Forwarding codepoint configured by default.

HP 3500 Series Specifications

General

Model	HP 3500 Series
Layer	Layer 3
MAC Address Table Size	16, 000 entries
Type	Managed
Uplink	SFP
PoE	Optional
Management	Web, CLI, SNMP
Routing Protocol	Static, RIP
Power Supply	Internal
Form Factor	1U rack-mountable
Jumbo Frame Support	Yes
Operating Temperature	32°F to 113°F (0°C to 45°C)
Ports	24 or 48 10/100/1000 ports