To Next Page

To Previous Page

4-13

Switch Meshing

Configuring Switch Meshing

Error — Indicates a multiple MAC-address error. This occurs when you

have two or more mesh ports from the same switch linked together

through a hub.

Topology Error — Two meshed switches are connected via a hub, and traffic

from other, non-meshed devices, is flowing into the hub. The show mesh

listing includes the MAC addresses of the adjacent switch and direct

connection port on the adjacent switch.

Hostname is the name of the adjacent switch (the switch at the other end of

the link).

Address is the base MAC address of the adjacent switch.

Peer port is the MAC address of the port on the adjacent switch to which the

mesh link connects.

Mesh Warning indicates whether the meshing process has generated a warning

for the mesh link:

Yes — one or more warning messages have been generated and written

to the event log. Use the show log command to see the warning(s).

No — no warning messages have been generated by the meshing process

for this port.

Other manuals for HP 3500 Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500 Series and is the answer not in the manual?

General