HP 54501A - Occurrence:slope

OCCurrence:SLOPe
OCCurrence:SLOPe
command/query
The
:TRIGGER:OCCURRENCE:SLOPE
command
sets
the
edge
that
will
be
counted
by the
occurrence
command.
The
parameters
for
this
command
are
NEGATIVE
or
POSITIVE.
This
command
is
valid
in
the
Delay Trigger Mode
and
the
TV
Trigger
Mode.
The OCCURRENCE:SLOPE
query
returns
the
slope
of
the
current
mode.
Command
Syntax:
:TRIGger:OCCurrence:SLOPe
{POSitive
|
NEGative}
Example:
OUTPUT
707;":TRiG:occ:SLOP
POS"
Query
Syntax:
:TRIGger:OCCurrence:SLOPe?
Returned
Format:
[:TRIGger:OCCurrence:SLOPe] {POSitive
|
NEGative}
<NL>
Example:
DIM
Tos$[so]
OUTPUT
707;"TRIGGER:OCCURRENCE:SLOP?"
ENTER
707;Tos$
PRINT
Tos$
Trigger
Subsystem
16-26
HP
54501A
Programming