HP 54501A - Occurrence:source

OCCurrence:SOURce
OCCurrence:SOURce
command/query
The :TRIGGER:OCCURRENCE:SOURCE
command
sets
the
edge
that
will
be
counted
by
the
occurrence
command.
The
parameters
for
this
command
are
CHANNELl
through
CHANNEIA
This
command
is
valid
in
the
Delay Trigger
Mode.
The OCCURRENCE:SOURCE
query returns
the
source
of
the
occurrence
in
the
Delay
Trigger
Mode.
Command
Syntax:
:TRIGger:OCCurrence:SOURce
{CHANneh
|
CHANnel2 | CHANnel3
|
CHANnel4}
Example:
OUTPUT
707;":TRIG:OCC:SOURCE
CHANNEL2"
Query
Syntax:
:TRIGger:OCCurrence:SOURce?
Returned
Format:
[:TRIGger:OCCurrence:SOURce] {CHANnell
|
CHANnel2 |
CHANnel3 |
CHANnel4}
<NL>
Example:
DIM Tos$[50]
OUTPUT
707;"TRIGGER:OCCURRENCE:
SOUR?"
ENTER
707;Tos$
PRINT
Tos$
HP
54501A
Programming
Trigger
Subsystem
16-27