10–18 User’s Guide
Using the Camera Features
Revised: 12/15/04
2. Select Install Now located at the top of the Install Desktop
Software screen and follow the instructions on the screen.
Once HP Image Transfer has been installed and is recognized by
ActiveSync, the ActiveSync window displays the Image
checkbox.
To enable and modify HP Image Transfer settings:
1. Open ActiveSync on your personal computer, if it is not
already open.
2. Double-click Image under the Details window or select
Options from the ActiveSync menu.
3. Select Image on the Sync options tab, and then select the
Settings button.
HP
Confidential
To Next Page
Loading...
