HP 6500 Series - Charging with the HP iPAQ Cradle and AC Adapter

13–8 User’s Guide
Managing the Battery
Charging with the HP iPAQ Cradle and
AC Adapter
Use the HP iPAQ Cradle to charge the HP iPAQ.
Note: It is not necessary to synchronize your HP iPAQ before
charging it.
To charge the HP iPAQ using the cradle:
1. Plug the AC Adapter into an electrical outlet 1 and connect
the other end of the AC Adapter to the AC connector on the
cradle 2.
2. Slide the bottom of your HP iPAQ into the cradle 3 and push
firmly to seat it.
Ä
CAUTION: To avoid damaging your HP iPAQ or the cradle, check to
be sure the HP iPAQ and cradle connectors are properly aligned
before pushing the HP iPAQ into the cradle.
Note: The amber charge light on the Power button blinks while
the battery is recharging and turns solid amber (nonblinking)
when the battery is fully charged.
HP
Confidential