Using Bluetooth
User’s Guide 9–15
Revised: 12/16/04
Establishing an ActiveSync Connection
You can set up an ActiveSync partnership with a
Bluetooth-enabled computer by first setting up your computer,
then setting up your HP iPAQ.
If you own an HP Evo Notebook or Desktop computer, you can
use the Bluetooth Multiport Module presinstalled on that
computer with your HP iPAQ.
If you are using other Bluetooth modules or cards on your
computer, refer to the Bluetooth Configuration Manager or
Settings for similar setup procedures, then skip to “Setting Up an
ActiveSync Partnership on Your HP iPAQ.”
Using the HP Bluetooth Multiport Module for
Evo Notebooks and Desktops
1. Remove your HP iPAQ from the HP iPAQ Cradle.
2. Turn on Bluetooth on both the HP iPAQ and the Evo
computer.
3. Right-click the Bluetooth icon in the system tray on your
computer, then click Advanced Configuration.
4. Select the Client Applications tab, then write down the
COM port number listed next to Bluetooth Serial Port.
HP
Confidential
To Next Page
Loading...
