Managing the Battery
User’s Guide 13–7
To charge the HP iPAQ using the AC Adapter:
1. Insert the AC Adapter plug into the AC Charger adapter 1.
2. Plug the AC Adapter into an electrical outlet 2.
3. Insert the AC Charger adapter into the communications port
on the bottom of the HP iPAQ 3.
Ä
CAUTION: To avoid damaging your HP iPAQ or the AC Adapter,
check to be sure all connectors are properly aligned before connecting
them.
4. When the Power button indicator on the top of the HP iPAQ
turns solid amber, the unit is fully charged and you can
disconnect the AC Adapter. The approximate time to fully
charge a drained battery is four hours.
Note: A standard battery can be charged in about four hours, an
optional extended battery takes longer.
HP
Confidential
To Next Page
Loading...
Need help?
General
