HP 75000 SERIES C User Manual

-330,"Self-test failed; Voltage calibration failed: dc offset ripple too high"
Triggered by: *TST? command. This is a hardware fault. Please
report error and returned value from *TST? command to service
personnel.
-330,"Self-test failed; Voltage calibration failed: offset or gain out of
range"
Triggered by: "TST? command. This is a hardware fault. Please
report error and returned value from *TST? command to service
personnel.
Error Messages E-9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

HP 75000 SERIES C Specifications

General

Brand	HP
Model	75000 SERIES C
Category	Inverter
Language	English