Claims and
Repackaging
Storage and Shipment
Return Shipments to
HP
If physical damage is evident or if the instrument does not meet
specification when received, notify the carrier and the nearest
Hewlett-Packard Service Office. The Sales/Service Office will arrange
for repair or replacement of the unit without waiting for settlement of
a claim against the carrier.
The instrument can be stored or shipped at temperatures between
-40°C
and
f75"C.
The instrument should be protected from
temperature extremes which may cause condensation within it.
If the instrument is to be shipped to a Hewlett-Packard Sales/Service
Office (see Appendix
F),
attach a tag showing owner, return address,
model number and full serial number and the type of service
required.
The original shipping carton and packing material may be re-usable,
but the Hewlett-Packard Sales/Service Office will also provide
information and recommendations on
materials to be used if
the original packing is no longer available or reusable. General
instructions for repacking are as follows:
1.
Wrap instrument in heavy paper or plastic.
2.
Use strong shipping container. A double wall carton is adequate.
3.
Use enough shock-absorbing material
(3
to
4
inch layer) around
all
sides of the instrument to provide a firm cushion and prevent
I
movement inside container.
4.
Seal shipping container securely.
5.
Mark shipping container
FRAGILE
to encourage careful handling.
6.
In any correspondence, refer to instrument by model number and
serial number.
Configuration
As detailed in the VXIbus Mainframe System Installation Guide,
each plug-in module has a row of switches which are used to set the
logical address of the module. The mainframe operating system uses
these unique addresses, to combine different modules into virtual
instruments within the mainframe slots. The module
is
addressed by
the computer program, using the logical address to distinguish it
from other modules in the system.
4
ATTENTION STATIC SENSITIVE Handle the
module, only at 'Static Safe' work stations
!
ATTENTION
Static Sensltlve
2-2
Configuring
the
HP
E1440A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
