[:SOURce]:AM
This command allows an external amplitude modulation signal to be
applied to the synthesizer circuit of the
HP
E1440A.
Subsystem Syntax
[:SOURce]
:AM
:STATe <boolean>
Parameters
Parameter Parameter
Range
of
1
Name
1
Type
1
Values
1
Comments
External
AM:
Is enabled with the :AM:STAT ON or :AM:STAT
1
command. Using this command does not automatically turn OFF
any other external modulation signal that may be in use.
Disable
AM:
Is disabled with the :AM:STAT OFF or :AM:STAT
0
command.
Related command:
*RST (sets to OFF).
The command is only allowed with :FUNC SIN.
-
--
ONlOFFlllO
5-16
Command Reference
boolean
ONlOFFlllO
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
