EasyManuals Logo

HP A3100-8 v2 SI User Manual

HP A3100-8 v2 SI
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #179 background imageLoading...
Page #179 background image
Enabling LLDP polling
With LLDP polling enabled, a device searches for local configuration changes periodically. Upon
detecting a configuration change, the device sends LLDPDUs to inform the neighboring devices of the
change.
Follow these steps to enable LLDP polling:
To do… Use the command… Remarks
Enter system view system-view —
Enter Layer 2 Ethernet
interface view
interface interface-type
interface-number
Enter Ethernet
interface view
or port group
view
Enter port group view port-group manual port-group-name
Required
Use either command.
Enable LLDP polling and set the polling
interval
lldp check-change-interval interval
Required
Disabled by default
Configuring the advertisable TLVs
Follow these steps to configure the advertisable LLDPDU TLVs on the specified port or ports:
To do… Use the command… Remarks
Enter system view system-view —
Enter Layer 2
Ethernet interface
view
interface interface-type interface-number
Enter
Ethernet
interface
view or
port group
view
Enter port group
view
port-group manual port-group-name
Required
Use either command.
Configure the advertisable TLVs
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot1-tlv { all | port-vlan-id | protocol-vlan-id
[ vlan-id ] | vlan-name [ vlan-id ] } | dot3-tlv
{ all | link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all |
capability | inventory | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1–10> | elin-address
tel-number } | network-policy |
power-over-ethernet } }
Optional
By default, all types of
LLDP TLVs except the
location identification
TLV are advertisable on
a Layer 2 Ethernet port.
Configuring the management address and its encoding format
LLDP encodes management addresses in numeric or character string format in management address
TLVs.
By default, management addresses are encoded in numeric format. If a neighbor encoded its
management address in character string format, you must configure the encoding format of the
management address as string on the connecting port to guarantee normal communication with the
neighbor.
172

Table of Contents

Other manuals for HP A3100-8 v2 SI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A3100-8 v2 SI and is the answer not in the manual?

HP A3100-8 v2 SI Specifications

General IconGeneral
BrandHP
ModelA3100-8 v2 SI
CategorySwitch
LanguageEnglish

Related product manuals