HP HPE ProLiant ML110 Gen9 - DIMM Slot Locations; System Maintenance Switch

Component identification 11
Item
Description
19
System battery
20
System maintenance switch
21
TPM connector
22
NMI header
23
Dedicated iLO port connector
24
Slot 5 PCIe3 x8 (8, 4, 1)
25
Slot 4 PCIe3 x4 (4, 1)
26
microSD card slot
27
Slot 3 PCIe3 x8 (8, 4, 1)
28
Slot 2 PCIe3 x4 (4, 1)
29
Slot 1 PCIe3 x16 (16, 8, 4, 1)
DIMM slot locations
DIMM slots are numbered sequentially (1 through 8) for the processor. The supported AMP modes use
the letter assignments for population guidelines.
The arrow points to the front of the server.
System maintenance switch
Position
Default
Function
S1
Off
Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
S2
Off
Off = System configuration can be
changed.
On = System configuration is locked.
S3
Off
Reserved
S4
Off
Reserved