Software and configuration utilities 100
• Intelligent Provisioning provides installation help for Microsoft Windows, Red Hat and SUSE Linux,
and VMware operating systems. For specific OS support, see the Intelligent Provisioning Release
Notes on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/intelligentprovisioning/docs).
For more information about Intelligent Provisioning software, see the Hewlett Packard Enterprise website
(http://www.hpe.com/servers/intelligentprovisioning). For Intelligent Provisioning recovery media
downloads, see the Resources tab on the Hewlett Packard Enterprise website
(http://www.hpe.com/servers/intelligentprovisioning). For consolidated drive and firmware update
packages, see the Smart Update: Server Firmware and Driver Updates page on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/SmartUpdate).
HPE Insight Diagnostics
The Insight Diagnostics is a proactive server management tool, available in both offline and online
versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify
server installations, troubleshoot problems, and perform repair validation.
The Insight Diagnostics Offline Edition performs various in-depth system and component testing while the
OS is not running. To run this utility, boot the server using Intelligent Provisioning (on page 99).
The Insight Diagnostics Online Edition is a web-based application that captures system configuration and
other related data needed for effective server management. Available in Microsoft Windows and Linux
versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the Hewlett Packard Enterprise website
(http://www.hpe.com/info/InsightDiagnostics). The Insight Diagnostics Online Edition is also available
in the SPP ("Service Pack for ProLiant" on page 101).
HPE Insight Diagnostics survey functionality
HPE Insight Diagnostics (on page 100) provides survey functionality that gathers critical hardware and
software information on ProLiant servers.
This functionality supports operating systems that are supported by the server. For operating systems
supported by the server, see the Hewlett Packard Enterprise website
(http://www.hpe.com/info/supportos).
If a significant change occurs between data-gathering intervals, the survey function marks the previous
information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted Insight Diagnostics
installation, or it can be installed through the SPP ("Service Pack for ProLiant" on page 101).
Erase Utility
CAUTION: Perform a backup before running the Erase Utility. The utility sets the system to
its original factory state, deletes the current hardware configuration information, including array
setup and disk partitioning, and erases all connected hard drives comple
utility, see the instructions in the Intelligent Provisioning User Guide.
Use the Erase Utility to erase drives and Active Health System logs, and to reset RBSU settings. Run the
Erase Utility if you must erase the system for the following reasons:
• You want to install a new operating system on a server with an existing operating system.
• You encounter an error when completing the steps of a factory-installed operating system
installation.
To access the Erase Utility, click the Perform Maintenance icon from the Intelligent Provisioning home
screen, and then select Erase.
To Next Page
Loading...
Need help?
General
