HP HPE ProLiant ML110 Gen9 User Manual

Component identification 9
Item
Description
14
USB 2.0 connectors
15
USB 3.0 connectors
16
Video connector
Rear panel LEDs
Item Description Status
1
Power supply LED
Solid green = Normal
Off = One or more of the following conditions exists:
•
Power is unavailable
•
Power supply failed
•
Power supply is in standby mode
•
Power supply error
2
iLO link LED
Green = Linked to network
Off = No network connection
3
iLO activity LED
Green or flashing green = Network activity
Off = No network activity
4
NIC activity LED
Green or flashing green = Network activity
Off = No network activity
5
NIC link LED
Green = Linked to network
Off = No network connection
6
UID button/LED
Solid blue = Activated
Flashing blue:
•
1 flash per second = Remote management or firmware upgrade in
progress
•
4 flashes per second = iLO manual reboot sequence initiated
•
8 flashes per second = iLO manual reboot sequence in progress
Off = Deactivated

HP HPE ProLiant ML110 Gen9 Specifications

General

Processor Sockets	1
Memory Slots	8 DIMM slots
Processor	Intel Xeon E5-2600 v3/v4
Chipset	Intel C610
Memory	DDR4 SmartMemory
Storage	Up to 8 LFF or 16 SFF drives
Storage Controller	Dynamic Smart Array B140i or P440ar
RAID Support	RAID 0, 1, 5, 10 with optional controller
Network	1GbE
Expansion Slots	PCIe slots
Form Factor	Tower
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Maximum Internal Storage	16 TB