HP HPE VAN SDN Controller 2.7 - Page 209

errorCode=$?
let "attempts = $attempts + 1"
if [ 35 -eq $errorCode ]; then
teamBackup_log "SSL error on POST to $postUrl, retrying..."
continue;
fi
break;
done
echo $postRes
}
#------------------------------------------------------------------------------
# Function put ( <ipAddr> <authToken> <url> <data> )
# Performs a PUT of the specified data.
#------------------------------------------------------------------------------
function put {
local putIP=$1
local putToken=$2
local putUrl=$3
local putData=$4
local attempts=0
while [ $attempts -lt 5 ]; do
putRes='curl --noproxy $putIP --header "X-Auth-Token:$putToken" \
--fail -ksS -L -f --request PUT "$putUrl" --data-binary "$putData"'
errorCode=$?
let "attempts = $attempts + 1"
if [ 35 -eq $errorCode ]; then
teamBackup_log "SSL error on POST to $putUrl, retrying"
continue;
fi
break;
done
echo $putRes
}
#------------------------------------------------------------------------------
# Function extractJSONString ( <json> <fieldName> )
# Extracts the Json value corresponding to the field name.
#------------------------------------------------------------------------------
function extractJSONString {
json=$1
field=$2
json='echo $json|tr -d '"'| sed -e 's/\,\|{/\n/g'|grep -w "$field"| \
cut -d ':' -f2-'
echo $json
}
#------------------------------------------------------------------------------
# Function getAuthToken ( <ipAddr> )
# Log-in and get the UID.
#------------------------------------------------------------------------------
function getAuthToken {
local nodeIP=$1
url="https://$nodeIP:8443/sdn/v2.0/auth"
login="{
\"login\": {
\"domain\": \"$domain\",
\"user\": \"$user\",
\"password\": \"$pass\"
}
}
}"
# Attempt to authenticate and extract token if successful.
auth=$(curl --noproxy $nodeIP -X POST --fail -ksSfL --url "$url" \
-H "Content-Type: application/json" --data-binary "$login" 2>&1)
if [ $? -ne 0 ]; then
teamBackup_log "Unable to authenticate as user $user in $domain domain."
exitBackup 1
fi
authToken='extractJSONString "$auth" "token" | sed '/^$/d''
if [ $restore_mode -ne 1 ] && [ "$authToken" == "" ]; then
teamBackup_log "Failed to get the authentication token."
exitBackup 1
fi
echo $authToken
}
#==============================================================================
# M A I N
#==============================================================================
restore_mode=1
selective_restore=0
# Check for unzip package.
command -v unzip &> /dev/null
if [ $? -ne 0 ]; then
echo "The unzip package must be installed to use this script."
exit 1
fi
# Check the user specified script parameters.
if [ $# -lt 3 ]; then
echo "Usage : restoreTeam <user> <domain> [<ip1> <ip2> ...] <user@IP:path>"
echo " <user> - user name to access the controller"
echo " <domain> - domain of the controller"
echo " [<ip1> <ip2> ...] - ip(s) of node(s) to be restored; if none are specified all nodes are restored"
echo " <user@IP:path> - remote location to retrieve backup file"
echo " user - the login name for the system"
echo " ip - the ip address of the system"
Restoring a controller team 209